Jackery Explorer 1000 v2 vs. BLUETTI AC180

Compare two mid-size US power stations with source-linked capacity, output, weight, and solar input facts.

Published September 22, 2026 · Updated October 1, 2026

Specifications at a glance

Specification	Jackery Explorer 1000 v2	BLUETTI AC180
Nominal capacity	1,070 Wh	1,152 Wh
Continuous AC output	1,500 W	1,800 W
Weight	10.8 kg / 23.8 lb	16 kg / 35.3 lb
Maximum solar input	400 W	500 W
Surge duration	Not documented	Not documented
Specification verification date	2026-09-22	2026-09-22

Runtime with the same load

These calculated illustrations use a full starting charge, 10% stopping reserve, 100% assumed capacity factor, 85% AC efficiency, and 5 W inverter idle draw. They show the effect of nominal capacity under identical assumptions, not measured product efficiency.

Sustained AC load	Jackery Explorer 1000 v2	BLUETTI AC180
50 W	15.1 hours	16.2 hours
100 W	7.9 hours	8.5 hours
300 W	2.7 hours	2.9 hours

Startup duration and connection requirements are separate checks. None of these estimates establishes motor-start compatibility or guaranteed operating time.

Capacity and output versus carrying weight

The AC180 has more documented nominal capacity and continuous AC output. With the same efficiency, reserve, and load assumptions, its larger capacity produces a longer calculated runtime. The Explorer 1000 v2 is lighter in the cited specifications, which may matter if the station must be moved frequently.

The additional continuous output is useful only if your load needs it and all other checks are satisfied. For a small sustained load, output capacity alone does not extend runtime. For a demanding appliance, a battery with adequate Wh may still be unsuitable if its output rating is too low.

Solar charging depends on the array

The AC180’s documented maximum solar input is higher. That number is a ceiling, not a prediction of panel output or charging time. Check each model’s input voltage and current limits against the proposed panels, then compare equivalent charging time using the same sunlight and loss assumptions.

Included panels, adapters, and cables can vary by bundle. Verify the exact package offered by the seller rather than assuming a model name includes everything required for your setup.

What remains unresolved

The catalog does not establish a supported surge duration for either model. A listed surge magnitude alone cannot confirm compressor or motor starting. Both also require device-specific USB and DC connection checks.

Start with your load plan, then decide whether the additional documented capacity and output are useful enough to justify carrying the heavier station. Review current warranty and purchase terms directly; there is no current-price or hands-on test claim in this comparison.

Need a different pairing? Use the comparison builder for any two or three published catalog models.

Evidence used

The facts above are specification-based. The source access date records when the evidence was checked; it is not a claim that the product was physically tested on that date.

BLUETTI: BLUETTI AC180 Portable Power Station — accessed 2026-09-22
Jackery: Explorer 1000 v2 Portable Power Station — accessed 2026-09-22